Whatsapp
Posted : Monday, December 04, 2023 05:30 AM
This position helps our end user to solve technical issues and provide guidance/service.
Major Areas of Responsibility Analysis customer’s issue and provide good solution.
Provide online training/troubleshooting service.
Perform onsite service.
Conduct engineering test, reproduce reported issue.
Answer phone call/Emails from Customers.
Write engineering documents.
Collect customer feedback and open issues, feedback them to R&D team.
Primary Objectives This position is to ensure our customers feel they are well covered by Arbin professionals and keep good relationship between our customers and Arbin.
This position also serves as a major source of customer feedback/system issues.
These feedbacks shall be collected, discussed internally and treated.
Specific Responsibilities of the Job (Optional) 1.
Analysis customer’s issue and find out solution to fix it.
Collect necessary files/data from customer, analyze the root cause of any issue reported, find out solution to fix it.
An issue can be escalated to engineering team.
2.
Provide online training/troubleshooting service.
Use phone call or remote access software to expedite troubleshooting process and provide online real time training/instruction.
3.
Perform onsite service.
Perform onsite Service including but not limited to: System set up, System calibration, troubleshooting, customer training.
4.
Conduct engineering Test.
Reproduce reported issue/bug Verify new feature/new fix Evaluate system limitation/performance during different scenario Perform specific test per customer’s need.
5.
Answer phone call/Emails from Customers.
Answer incoming phone calls/emails, summarize customer’s questions and feedback.
6.
Write engineering documents.
Internal documents include but not limited to: Module assemble/testing instruction Module troubleshoot procedure Module/Product/Feature Introduction Engineering test report.
External documents include but not limited to: Product white paper (technical introduction).
Product General Introduction.
Product Specification sheet.
7.
Collect customer feedback and open issues, feedback them to R&D team.
Collect feedback through phone call, emails, visits.
Summarize it for further discussion.
Required Knowledge, Skills, and Abilities Have basic Electrical Engineering knowledge including component/circuit analyze.
Understand analog circuit theory and digital circuit theory.
Able to use multimeter, oscilloscope and other common equipment.
Ability to read and write technical documents.
Travel work will be 25% - 50% when needed.
Good communication with others and able to talk before camera.
Good learning ability and attitude Able to handle multiple tasks Knowledge of Power system/Power Electronics is preferred.
Knowledge of computer network is preferred.
Education and Experience Degree or equivalent experience: BS degree in Engineering, EE is preferred Years of experience: 0 or above Specialized training in: Electrical or electronics Active affiliations: None Other requirements (certifications and so forth): None Physical Demands (Optional, e.
g.
, for production/logistics) Able to take coast to coast flight, able to drive independently.
Work Environment Office/Lab/Facility/onsite combined About Arbin Instruments Arbin Instruments has been providing testing equipment for energy storage applications large and small for over 30 years.
Nestled in the lush Brazos Valley, Arbin’s headquarters and production facility is located in College Station, spanning approximately 65,000 square feet and housing our administrative, manufacturing, R&D, marketing, support, sales, and operations personnel.
At Arbin, we understand the vital role energy storage plays in our everyday life and its importance to our future.
This is why we work hard to provide the best service and testing equipment as a tool for both researchers and industry.
Dr.
John Zhang, Arbin’s owner, has more than 10 patents in his name that are utilized in our products and he remains our chief research and development scientist.
Arbin is a leading global supplier of testing instruments for the energy storage market.
We have offices around the world including Germany, China, Korea, Taiwan, Hong Kong and most recently India and Vietnam.
Our customers include some of the largest electric vehicle manufacturers, consumer electronics manufacturers, universities and research labs, and battery manufacturers around the world.
To find out more about Arbin visit our website at www.
arbin.
com.
Major Areas of Responsibility Analysis customer’s issue and provide good solution.
Provide online training/troubleshooting service.
Perform onsite service.
Conduct engineering test, reproduce reported issue.
Answer phone call/Emails from Customers.
Write engineering documents.
Collect customer feedback and open issues, feedback them to R&D team.
Primary Objectives This position is to ensure our customers feel they are well covered by Arbin professionals and keep good relationship between our customers and Arbin.
This position also serves as a major source of customer feedback/system issues.
These feedbacks shall be collected, discussed internally and treated.
Specific Responsibilities of the Job (Optional) 1.
Analysis customer’s issue and find out solution to fix it.
Collect necessary files/data from customer, analyze the root cause of any issue reported, find out solution to fix it.
An issue can be escalated to engineering team.
2.
Provide online training/troubleshooting service.
Use phone call or remote access software to expedite troubleshooting process and provide online real time training/instruction.
3.
Perform onsite service.
Perform onsite Service including but not limited to: System set up, System calibration, troubleshooting, customer training.
4.
Conduct engineering Test.
Reproduce reported issue/bug Verify new feature/new fix Evaluate system limitation/performance during different scenario Perform specific test per customer’s need.
5.
Answer phone call/Emails from Customers.
Answer incoming phone calls/emails, summarize customer’s questions and feedback.
6.
Write engineering documents.
Internal documents include but not limited to: Module assemble/testing instruction Module troubleshoot procedure Module/Product/Feature Introduction Engineering test report.
External documents include but not limited to: Product white paper (technical introduction).
Product General Introduction.
Product Specification sheet.
7.
Collect customer feedback and open issues, feedback them to R&D team.
Collect feedback through phone call, emails, visits.
Summarize it for further discussion.
Required Knowledge, Skills, and Abilities Have basic Electrical Engineering knowledge including component/circuit analyze.
Understand analog circuit theory and digital circuit theory.
Able to use multimeter, oscilloscope and other common equipment.
Ability to read and write technical documents.
Travel work will be 25% - 50% when needed.
Good communication with others and able to talk before camera.
Good learning ability and attitude Able to handle multiple tasks Knowledge of Power system/Power Electronics is preferred.
Knowledge of computer network is preferred.
Education and Experience Degree or equivalent experience: BS degree in Engineering, EE is preferred Years of experience: 0 or above Specialized training in: Electrical or electronics Active affiliations: None Other requirements (certifications and so forth): None Physical Demands (Optional, e.
g.
, for production/logistics) Able to take coast to coast flight, able to drive independently.
Work Environment Office/Lab/Facility/onsite combined About Arbin Instruments Arbin Instruments has been providing testing equipment for energy storage applications large and small for over 30 years.
Nestled in the lush Brazos Valley, Arbin’s headquarters and production facility is located in College Station, spanning approximately 65,000 square feet and housing our administrative, manufacturing, R&D, marketing, support, sales, and operations personnel.
At Arbin, we understand the vital role energy storage plays in our everyday life and its importance to our future.
This is why we work hard to provide the best service and testing equipment as a tool for both researchers and industry.
Dr.
John Zhang, Arbin’s owner, has more than 10 patents in his name that are utilized in our products and he remains our chief research and development scientist.
Arbin is a leading global supplier of testing instruments for the energy storage market.
We have offices around the world including Germany, China, Korea, Taiwan, Hong Kong and most recently India and Vietnam.
Our customers include some of the largest electric vehicle manufacturers, consumer electronics manufacturers, universities and research labs, and battery manufacturers around the world.
To find out more about Arbin visit our website at www.
arbin.
com.
• Phone : NA
• Location : College Station, TX
• Post ID: 9041576256
